Rohde & Schwarz R&S FSL3 - Page 1476

R&S FSL FETCh Subsystem (WLAN, K91 / K91n)
1300.2519.12 6.717 E-11
FETCh:BURSt:FERRor:AVERage? / FETCh:BURSt:FERRor:MAXimum? /
FETCh:BURSt:FERRor:MINimum?
This command returns the measured average, minimum or maximum frequency errors in
Hertz.???
This command is a query only and thus has no *RST value.
Example
FETC:BURS:FERR:MAX?
The maximum frequency error from the most recent measurement is returned.
Characteristics
*RST value: –
SCPI: device–specific
Mode
WLAN
FETCh:BURSt:GIMBalance:AVERage? / FETCh:BURSt:GIMBalance:MAXimum? /
FETCh:BURSt:GIMBalance:MINimum?
This command returns the measured average, minimum or maximum IQ Imbalance errors in
dB.???
This command is a query only and thus has no *RST value.
Example
FETC:BURS:GIMB:MAX?
The maximum IQ Imbalance error from the most recent measurement is returned.
Characteristics
*RST value: –
SCPI: device–specific
Mode
WLAN
FETCh:BURSt:IQOFfset:AVERage? / FETCh:BURSt:IQOFfset:MAXimum? /
FETCh:BURSt:IQOFfset:MINimum?
This command returns the measured average, minimum or maximum IQ Offset errors in dB.???
This command is a query only and thus has no *RST value.
Example
FETC:BURS:IQOF:MAX?
The maximum IQ Offset error from the most recent measurement is returned.
Characteristics
*RST value: –
SCPI: device–specific
Mode
WLAN