R&S FSL CALCulate:MARKer Subsystem (WiMAX, K92/K93)
1300.2519.12 6.779 E-11
C
ALCulate<1|2>:MARKer<1>:FUNCtion:TTCapture:TIME?
This command returns the time to the start of the first frame in the capture buffer.
This command is only a query and therefore has no *RST value.
Example
CALC:MARK:FUNC:TTC:TIME?
Returns the time to the start of the first frame in the capture buffer.
Characteristics
RST value: –
SCPI: device–specific
Mode
OFDMA/WiBro
CALCulate<1|2>:MARKer<1>:X
This command positions the selected marker to the indicated in phase (Constellation vs
Symbol), frequency (Spectrum FFT, Spectrum Mask), time (Magnitude Capture Buffer, Auto
Level, PVT Full Burst, PVT Rising / Falling), power (CCDF), sub–carrier (Constellation vs
Carrier, EVM vs Carrier, Spectrum Flatness) or symbol (EVM vs Symbol) in the selected
measurement window.
For the following result displays, this command is a query only:
– Constellation vs Symbol
– Constellation vs Carrier
Parameter
1 to <maximum range for selected measurement>
Example
CALC:MARK:X 2ms
Positions marker 1 in screen A to time 2 ms.
Characteristics
RST value: –
SCPI: device–specific
Mode
OFDM, OFDMA/WiBro
To Next Page
Loading...
