CALCulate:MARKer Subsystem (WiMAX, K92/K93) R&S FSL
1300.2519.12 6.780 E-11
C
ALCulate<1|2>:MARKer<1>:Y?
This command queries the marker value of the indicated quadrature (Constellation vs Symbol),
magnitude of I or Q (Constellation vs Carrier), EVM (EVM vs Carrier) or abs (Spectrum
Flatness) in the selected measurement window.
This command is only a query and therefore has no *RST value.
This command is only available for the following result displays:
– Auto Level
– Constellation vs Symbol
– Constellation vs Carrier
– EVM vs Symbol
– PVT Full
– PVT Rising / Falling
– Magnitude Capture Buffer
– Spectrum Mask
– Spectrum FFT
– CCDF
Example
CALC2:MARK:Y –2
Positions marker 1 in screen B to –2.
CALC:MARK:Y?
Outputs the measured value of marker 1 in screen A.
Characteristics
RST value: –
SCPI: device–specific
Mode
OFDM, OFDMA/WiBro
To Next Page
Loading...
