R&S FSL CONFigure Subsystem (WiMAX, K92/K93)
1300.2519.12 6.787 E-11
CONFigure:BURSt:CONSt:CARRier:SELect
This command selects carriers and pilots. It is only available if the Constellation vs Symbol
measurement is selected (see CONFigure:BURSt:CONSt:CSYMbol[:IMMediate]
command).
Parameter
–100 to 100 carrier number
ALL all carriers
PILOTS only pilots
Example
CONF:BURS:CONS:CSYM
Configures the Constellation vs Symbol measurement type.
CONF:BURS:CONS:CARR:SEL –26
Carrier –26 is selected.
INIT
Starts a Constellation vs Symbol measurement. The results of the selected carrier (–26) are
calculated.
Characteristics
RST value: ALL
SCPI: device–specific
Mode
OFDM, OFDMA/WiBro
CONFigure:BURSt:CONSt:CCARrier[:IMMediate]
This command configures the Constellation vs Carrier measurement type.
This command is an event and therefore has no *RST value and no query.
Example
CONF:BURS:CONS:CCAR
Configures the Constellation vs Carrier measurement type.
INIT
Starts a Constellation vs Carrier measurement.
Characteristics
RST value: –
SCPI: device–specific
Mode
OFDM
To Next Page
Loading...
