CONFigure Subsystem (WiMAX, K92/K93) R&S FSL
1300.2519.12 6.794 E-11
Characteristics
RST value: –
SCPI: device–specific
Mode
OFDM, OFDMA/WiBro
CONFigure:BURSt:SPECtrum:MASK:SELect
This command configures the interpretation of the Spectrum Mask measurement results..
Parameter
IEEE interpretation according to IEEE standard
ETSI interpretation according to ETSI standard
Example
CONF:BURS:SPEC:MASK
Configures the Spectrum Mask measurement type.
CONF:BURS:SPEC:MASK:SEL ETSI
The measurement results are interpreted using the ETSI standard.
Characteristics
RST value: –
SCPI: device–specific
Mode
OFDM, OFDMA/WiBro
CONFigure:BURSt:STATistics:BSTReam[:IMMediate]
This command configures the Bitstream measurement type.
This command is an event and therefore has no *RST value and no query.
Example
CONF:BURS:STAT:BSTR
Configures the Bitstream measurement type.
INIT
Starts a Bitstream measurement.
Characteristics
RST value: –
SCPI: device–specific
Mode
OFDM, OFDMA/WiBro
To Next Page
Loading...
