R&S FSL CONFigure Subsystem (WiMAX, K92/K93)
1300.2519.12 6.795 E-11
C
ONFigure:BURSt:STATistics:BSUMmary[:IMMediate]
This command configures the Burst Summary measurement type.
T
his command is an event and therefore has no *RST value and no query.
Example
CONF:BURS:STAT:BSUM
Configures the Burst Summary measurement type.
INIT
Starts a the Burst Summary measurement.
Characteristics
RST value: –
SCPI: device–specific
Mode
OFDM, OFDMA/WiBro
CONFigure:BURSt:STATistics:CCDF[:IMMediate]
This command configures the CCDF (conditional cumulative distribution functions)
measurement type.
This command is an event and therefore has no *RST value and no query.
Example
CONF:BURS:STAT:CCDF
Configures the CCDF measurement type.
INIT
Starts a CCDF measurement.
Characteristics
RST value: –
SCPI: device–specific
Mode
OFDM, OFDMA/WiBro
CONFigure:CHANnel
This command specifies the measurement input channel. This command will automatically
cause the internal measurement frequency to be recalculated.
Parameter
0 to 3153
Example
CONF:CHAN 9
Defines the frequency of channel 9 as measurement range.
Characteristics
RST value: 0
SCPI: device–specific
Mode
OFDM
To Next Page
Loading...
