Rohde & Schwarz R&S FSL3 - Page 1560

R&S FSL CONFigure Subsystem (WiMAX, K92/K93)
1300.2519.12 6.801 E-11
C
haracteristics
RST value: –
SCPI: device–specific
M
ode
OFDM, OFDMA/WiBro
CONFigure:WIMax:NFFT
This command specifies the current FFT size.
Parameter
FFT128 FFT size of 128 carriers
FFT512 FFT size of 512 carriers
FFT1024 FFT size of 1024 carriers
FFT2048 FFT size of 2048 carriers
Example
CONF:WIM:NFFT FFT2048
Sets the FFT size to 2048 carriers.
Characteristics
RST value: FFT1024
SCPI: device–specific
Mode
OFDMA/WiBro
CONFigure:WIMax:TDDFrame:TTG
This command specifies the TDD frame TX Transition Gap (TTG).
Parameter
0 to 2 seconds
Example
CONF:WIM:TDDF:TTG 10us
Specifies the TDD frame TX Transition Gap as 10 Us.
Characteristics
RST value: 5us
SCPI: device–specific
Mode
OFDMA/WiBro