R&S FSL CONFigure Subsystem (WiMAX, K92/K93)
1300.2519.12 6.803 E-11
<Subchannel
Offset>
<numeric_value> subchannel offset of the burst
<Symbol Offset> <numeric_value> symbol offset of the burst
<Burst Power> <numeric_value> Defines the boosting power of the burst.
<Burst Type> FCH | DLMAP | ULMAP | DATA burst type
For further details refer to chapter "Instrument Functions", section "WiMAX, WiBro
Measurements (Options K92/K93)", Burst List description.
Example
CONF:WIM:ZONE1:BURS1:CONT QAM16_1_2,1D2,5,10,20,0,0,0, DATA
Defines a 16 QAM 1/2 burst using 5 subchannels and 10 symbols.
Characteristics
RST value: –
SCPI: device–specific
Mode
OFDMA/WiBro
CONFigure:WIMax:ZONE<1…26>:BURSt<1...32>:COUNt?
This command returns the current count of user defined bursts within the specified zone.
This command is only a query and therefore has no *RST value.
Example
CONF:WIM:ZONE1:BURS1:COUN?
Returns the user defined bursts within zone 1.
Characteristics
RST value: –
SCPI: device–specific
Mode
OFDMA/WiBro
CONFigure:WIMax:ZONE<1…26>:BURSt<1...32>:DELete
This command deletes a specific burst from within the specified zone.
Example
CONF:WIM:ZONE1:BURS1:DEL
Deletes burst 1 from zone 1.
Characteristics
RST value: –
SCPI: device–specific
Mode
OFDMA/WiBro
To Next Page
Loading...
