Rohde & Schwarz R&S FSL3 - Page 1565

CONFigure Subsystem (WiMAX, K92/K93) R&S FSL
1300.2519.12 6.806 E-11
CONFigure:WIMax:ZONE<1…26>:BURSt<1...32>:SUBChannel:OFFSet
This command defines, for the specified zone and burst, the logical subchannels offset for the
burst. This, together with the symbol offset, can be used to specify the frequency bandwidth in
use by specific bursts.
Parameter
0 to 60
Example
CONF:WIM:ZONE1:BURS1:SUBC:OFFS 5
Sets the subchannels offset for burst 1 to 5.
Characteristics
RST value: –
SCPI: device–specific
Mode
OFDMA/WiBro
CONFigure:WIMax:ZONE<1…26>:BURSt<1...32>:SYMBol:COUNt
This command defines, for the specified zone and burst, the number of symbols used by the
burst.
Parameter
1 to 1000
Example
CONF:WIM:ZONE1:BURS1:SYMB:COUN 5
Sets the number of symbols used by burst 1 to 5.
Characteristics
RST value: –
SCPI: device–specific
Mode
OFDMA/WiBro
CONFigure:WIMax:ZONE<1…26>:BURSt<1...32>:SYMBol:OFFSet
This command defines, for the specified zone and burst, the symbol offset for the burst. This,
together with the logical subchannel offset, can be used to specify the frequency bandwidth in
use by specific bursts.
Parameter
0 to 1000
Example
CONF:WIM:ZONE1:BURS1:SYMB:OFFS 5
Sets the symbol offset for burst 1 to 5.
Characteristics
RST value: –
SCPI: device–specific
Mode
OFDMA/WiBro