Rohde & Schwarz R&S FSL3 - Page 1573

DISPlay Subsystem (WiMAX, K92/K93) R&S FSL
1300.2519.12 6.814 E-11
D
ISPlay[:WINDow<1|2>]:TRACe<1…3>:Y[:SCALe]:RLEVel[:RF]
This command specifies the reference level applied to an RF measurements.
T
he numeric suffixes of WINDow<1|2> and TRACe<1 to 3> are irrelevant.
Parameter
<numeric_value> in dBm, range specified in data sheet
Example
DISP:TRAC:Y:RLEV 10
Reference level of the analyzer is 10 dB
DISP:TRAC:Y:RLEV:RF –10
Reference level of the analyzer is –10 dB
Characteristics
RST value: 0 dB
SCPI: conform
Mode
OFDM, OFDMA/WiBro
DISPlay[:WINDow<1|2>]:TRACe<1…3>:Y[:SCALe]:RLEVel?
This command queries the current internal instrument reference level used when performing
measurements.
The numeric suffixes of WINDow<1|2> and TRACe<1 to 3> are irrelevant.
This command is only a query and therefore has no *RST value.
Example
DISP:TRAC:Y:RLEV?
Returns the current reference level in use.
Characteristics
RST value: –
SCPI: conform
Mode
OFDM, OFDMA/WiBro