R&S FSL FETCh Subsystem (WiMAX, K92/K93)
1300.2519.12 6.823 E-11
FETCh:BURSt:RMS:ALL:AVERage? / FETCh:BURSt:RMS:ALL:MAXimum? /
FETCh:BURSt:RMS:ALL:MINimum?
This command returns the average, minimum or maximum RMS burst power in dBm for all
carriers measured during the measurement.
This command is only a query and therefore has no *RST value.
Example
FETC:BURS:RMS:ALL:MAX?
The maximum RMS burst power for all carriers recorded during the most recent measurement is
returned.
Characteristics
RST value: –
SCPI: device–specific
Mode
OFDM
FETCh:BURSt:RMS:AVERage? / FETCh:BURSt:RMS:MAXimum? /
FETCh:BURSt:RMS:MINimum?
This command returns the average, minimum or maximum RMS burst power in dBm measured
during the measurement.
This command is only a query and therefore has no *RST value.
Example
FETC:BURS:RMS:MAX?
The maximum burst power recorded for the most recent measurement is returned.
Characteristics
RST value: –
SCPI: device–specific
Mode
OFDM
FETCh:BURSt:RMS:DATA:AVERage? / FETCh:BURSt:RMS:DATA:MAXimum? /
FETCh:BURSt:RMS:DATA:MINimum?
This command returns the average, minimum or maximum RMS burst power in dBm for data
carriers measured during the measurement.
This command is only a query and therefore has no *RST value.
Example
FETC:BURS:RMS:DATA:MAX?
The maximum RMS burst power for data carriers from the most recent measurement is
returned.
Characteristics
RST value: –
SCPI: device–specific
Mode
OFDM
To Next Page
Loading...
