R&S FSL SENSe Subsystem (WiMAX, K92/K93)
1300.2519.12 6.847 E-11
[SENSe:]SWEep:EGATe
For details refer to "[SENSe<1|2>:]SWEep:EGATe" on page 6.230.
[SENSe:]SWEep:EGATe:HOLDoff[:TIME]
This command defines the gate delay in the capture buffer in time units.
Parameter
0 to 262.14 ms
Example
SWE:EGAT:HOLD 125us
Sets a delay of 125 µs in the capture buffer.
Characteristics
*RST value: 0 s
SCPI: device–specific
Mode
OFDM, OFDMA/WiBro
[SENSe:]SWEep:EGATe:HOLDoff:SAMPle
This command defines the gate delay in the capture buffer as a number of samples.
Parameter
0 to 50E6
Example
SWE:EGAT:HOLD:SAMP 2500
Sets a delay of 2500 samples in the capture buffer.
Characteristics
*RST value: 0
SCPI: device–specific
Mode
OFDM, OFDMA/WiBro
[SENSe:]SWEep:EGATe:LENGth[:TIME]
This command defines the gate time in the capture buffer in time units.
Parameter
0 to 262.14 ms
Example
SWE:EGAT:LENG 100ms
Sets a gate length of 100 milliseconds between sweeps.
Characteristics
*RST value: 0
SCPI: device–specific
Mode
OFDM, OFDMA/WiBro
To Next Page
Loading...
