SENSe Subsystem (WiMAX, K92/K93) R&S FSL
1300.2519.12 6.848 E-11
[SENSe:]SWEep:EGATe:LENGth:SAMPle
This command defines the gate time in the capture buffer as a number of samples.
Parameter
0 to 50E6
Example
SWE:EGAT:LENG:SAMP 2000000
Enforces a gate length of 2000000 samples in the capture buffer.
Characteristics
*RST value: 0
SCPI: device–specific
Mode
OFDM, OFDMA/WiBro
[SENSe:]SWEep:EGATe:LINK
This command links together the movement of the gating lines and the capture buffer marker.
Parameter
ON | OFF
Example
SWE:EGAT:LINK ON
Keeps the capture buffer marker on the centre of the gating lines if the gating line delay and
length are changed.
Characteristics
*RST value: 0
SCPI: device–specific
Mode
OFDM, OFDMA/WiBro
[SENSe:]SWEep:TIME
Parameter
24 Us to 15.5 ms
Characteristics
*RST value: 24 Us
For further details refer to "[SENSe<1|2>:]SWEep:TIME" on page 6.234.
To Next Page
Loading...
