R&S FSL SCPI–Specific Error Messages
1300.2519.12 9.3 E-11
Error code Error text in the case of queue poll
Error explanation
–131
Invalid suffix
The suffix is invalid for this instrument.
Example: nHz is not defined.
–134
Suffix too long
The suffix contains more than 12 characters.
–138
Suffix not allowed
A suffix is not allowed for this command or at this position of the command.
Example: The command *RCL does not permit a suffix to be indicated.
–140
Character data error
The command contains a faulty text parameter
–141
Invalid character data
The text parameter either contains an invalid character or it is invalid for this command.
Example: Write error with parameter indication;INPut:COUPling XC.
–144
Character data too long
The text parameter contains more than 12 characters.
–148
Character data not allowed
The text parameter is not allowed for this command or at this position of the command.
Example: The command *RCL requires a number to be indicated.
–150
String data error
The command contains a faulty string.
–151
Invalid string data
The command contains a faulty string.
Example: An END message has been received prior to the terminating apostrophe.
–158
String data not allowed
The command contains an allowed string at an invalid position.
Example: A text parameter is set in quotation marks, INPut:COUPling "DC"
–160
Block data error
The command contains faulty block data.
–161
Invalid block data
The command contains faulty block data.
Example: An END message was received prior to reception of the expected number of data.
–168
Block data not allowed
The command contains allowed block data at an invalid position.
Example: The command *RCL requires a number to be indicated.
–170
Expression error
The command contains an invalid mathematical expression.
–171
Invalid expression
The command contains an invalid mathematical expression.
Example: The expression contains mismatching parentheses.
–178
Expression data not allowed
The command contains a mathematical expression at an invalid position.
To Next Page
Loading...
