Measurement Mode Selection – MODE Key R&S FSL
1300.2519.12 4.130 E-11
Cable TV Analyzer mode (Cable TV Measurements option, K20)
The Cable TV Analyzer mode requires an instrument equipped with the corresponding optional
software. This mode provides ready–made measurements for analog and digital TV signals where most
of the parameters are set automatically. For details refer to "Cable TV Measurements (Option K20)" on
page 4.203.
Noise mode (Noise Figure Measurements option, K30)
The Noise mode requires an instrument equipped with the corresponding optional software. This mode
provides accurate and flexible noise measurement functions. For details refer to "Noise Figure
Measurements Option (K30)" on page 4.247.
3G FDD BTS mode (3GPP Base Station Measurements option, K72)
The 3G FDD BTS mode requires an instrument equipped with the corresponding optional software.
This mode provides test measurements for WCDMA downlink signals (base station signals) according
to the test specification. For details refer to "3GPP Base Station Measurements (Option K72)" on page
4.271.
CDMA2000 BTS Analyzer mode (CDMA2000 Base Station Measurements option,
K82)
The CDMA2000 BTS Analyzer mode requires an instrument equipped with the corresponding optional
software. This mode provides test measurements on forward link signals (base station) according to the
3GPP2 Standard (Third Generation Partnership Project 2). For details refer to "CDMA2000 BTS
Analyzer (Option K82)" on page 4.295.
1xEV-DO BTS Analyzer mode (1xEV-DO Base Station Measurements option, K84)
The 1xEV-DO BTS Analyzer mode requires an instrument equipped with the corresponding optional
software. This mode provides test measurements on forward link signals (base station) according to the
3GPP2 Standard (Third Generation Partnership Project 2). For details refer to "1xEV-DO BTS Analyzer
(Option K84)" on page 4.356.
WLAN mode (WLAN TX Measurements option, K91/K91n)
The WLAN mode requires an instrument equipped with the corresponding optional software. This mode
provides Wireless LAN TX measurement functions according to IEEE 802.11 a, b, g, j and n standards.
For details refer to "WLAN TX Measurements (Option K91 / K91n)" on page 4.409.
WiMAX mode (WiMAX IEEE 802.16 OFDM, OFDMA Measurements option, K92/K93)
The WiMAX mode requires an instrument equipped with the WiMAX IEEE 802.16 OFDM, OFDMA
Measurements option (R&S FSL–K93). This mode provides WiMAX and WiBro measurement functions
according to IEEE standards 802.16–2004 OFDM and 802.16e–2005 OFDMA/WiBro. It includes the
WiMAX 802.16 OFDM Measurements option (R&S FSL–K92). For details refer to "WiMAX, WiBro
Measurements (Options K92/K93)" on page 4.441.
To Next Page
Loading...
