1xEV-DO BTS Analyzer (Option K84) R&S FSL
1300.2519.12 4.356 E-11
1xEV-DO BTS Analyzer (Option K84)
The R&S FSL equipped with the 1xEV-DO BTS Analyzer option performs Code Domain measurements
on forward link signals according to the 3GPP2 Standard (Third Generation Partnership Project 2) high
rate packet data. The standard, which was defined for packet-oriented data communications, is
generally referred to as 1xEV-DO (First EV
olution Data Only).
This option is available from firmware version 2.00
To open the 1xEV-DO BTS Analyzer
If the 1xEV-DO BTS Analyzer mode is not the active measurement mode, press the MODE key
and activate the 1xEV-DO BTS Analyzer option.
If the 1xEV-DO BTS Analyzer mode is already active, press the MENU key.
The Code Domain Analyzer menu is displayed.
Further Information
– Measurements and result display
– Channel Type Characteristics
– Predefined Channel Tables
Menu and softkey description
– "Softkeys of the Code Domain Analyzer Menu (1xEV-DO BTS Analyzer mode)" on page 4.365
– "Softkeys of the frequency menu (1xEV-DO BTS Analyzer mode)" on page 4.390
– "Softkeys of the span menu (1xEV-DO BTS Analyzer mode)" on page 4.391
– "Softkeys of the amplitude menu (1xEV-DO BTS Analyzer mode)" on page 4.392
– "Softkeys of the bandwidth menu (1xEV-DO BTS Analyzer mode)" on page 4.394
– "Softkeys of the sweep menu (1xEV-DO BTS Analyzer mode)" on page 4.395
– "Softkeys of the trigger menu (1xEV-DO BTS Analyzer mode)" on page 4.396
– "Softkeys of the trace menu (1xEV-DO BTS Analyzer mode)" on page 4.396
– "Softkeys of the marker menu (1xEV-DO BTS Analyzer mode)" on page 4.397
– "Softkeys of the marker–> menu (1xEV-DO BTS Analyzer mode)" on page 4.399
– "Softkeys of the measurement menu (1xEV-DO BTS Analyzer mode)" on page 4.400
To Next Page
Loading...
