1xEV-DO BTS Analyzer (Option K84) R&S FSL
1300.2519.12 4.392 E-11
Softkeys of the amplitude menu (1xEV-DO BTS Analyzer mode)
T
he following table shows all softkeys available in the amplitude menu in 1xEV-DO BTS Analyzer
mode. It is possible that your instrument configuration does not provide all softkeys. If a softkey is only
available with a special option, model or measurement mode, this information is delivered in the
corresponding softkey description.
Menu / Command Command
Ref Level
Adjust Ref Level
Ref Level Offset
Preamp On/Off
Scaling Auto Scale Once
y-Axis Maximum
y-Axis Minimum
RF Atten Manual
RF Atten Auto
Ref Level
For details refer to the Ref Level softkey in the amplitude menu of the base unit.
Adjust Ref Level
For details refer to the Adjust Ref Level softkey in the Code Domain Analyzer menu.
Ref Level Offset
For details refer to the Ref Level Offset softkey in the amplitude menu of the base unit.
Preamp On/Off
For details refer to the Preamp On/Off softkey in the amplitude menu of the base unit.
Note that this softkey is only available if the hardware option RF Preamplifier B22 is installed.
Scaling
Opens a submenu with the following softkeys:
Auto Scale Once
y-Axis Maximum
y-Axis Minimum
This submenu is only available for code domain measurements.
To Next Page
Loading...
