Cable TV Measurements (Option K20) R&S FSL
1300.2519.12 4.224 E-11
New
Creates a new channel table and opens the Channel Table dialog box with the according
submenu to edit the channel table.
It is recommended to use long names in order to distinguish the channel tables from each other
easily.
For further details refer to "To create a channel table" on page 4.206.
Copy Channel
Copies the channel in focus.
Delete Channel
Deletes the channel in focus. If the channel table consists only of one channel, this channel can
not be deleted.
Modulation Options
Opens the Modulation Standards dialog box with all available modulation standards of the
channel table listed, and displays a submenu to create, edit, and delete a modulation standard.
For further information on modulation standards refer to "Modulation standards" on page 4.210,
"To create a new modulation standard" on page 4.207, and "To copy a modulation standard" on
page 4.208.
New
Opens the Modulation Standard Options dialog box to define a new modulation standard for
the channel table.
For further information on modulation standards refer to "Modulation standards" on page 4.210
and "To create a new modulation standard" on page 4.207.
Remote: DDEM:SBAN NORM
Remote: DDEM:SRAT 1000000
Remote: DDEM:FILT:ALPH R018
Remote: TV:MST:NAME 'TEST'
Remote: TV:MST:STYP DTV
Remote: TV:MST:FILT:GDEL FLAT
Remote: SET:TV:STAN DK
Remote: SET:TV:STAN:AUD FM65MONO
Remote: SET:TV:STAN:COL SEC
Delete
Deletes the modulation standard focused in the Modulation Standards dialog box.
To Next Page
Loading...
