Noise Figure Measurements Option (K30) R&S FSL
1300.2519.12 4.256 E-11
Max Y–Axis Temp
Symbols
Gain Trace Settings Y–Axis
Automatic Scaling
Min Y–Axis
Max Y–Axis
Symbols
Noise and Gain X–Axis Settings X–Axis
Combined Trace Display
Activates or deactivates the combined trace display of noise and gain results.
On The noise and gain traces are displayed in the same trace display in different colors.
Off The noise and gain traces are displayed in different trace displays.
Remote: DISP:FORM SING
Y–Axis
Specifies the type of noise result that is to be displayed graphically:
– Noise Figure
– Noise Temperature
– Off (no noise results are displayed graphically)
Remote: DISP:DATA:TRAC1 NFIG|TEFF
Remote: DISP:TRAC OFF
Automatic Scaling
Activates or deactivates the automatic scaling of the Y–axis.
On The y–axis is scaled automatically. The automatic scaling algorithm provides the
optimal display of the complete range of results.
Off The automatic scaling of the y–axis is switched off, and the scale has to be specified
manually:
for noise results via the Min Y–Axis NF/Min Y–Axis Temp/Max Y–Axis NF/Max Y–
Axis Temp fields,
for gain results via the Min Y–Axis/Max Y–Axis fields.
Remote: DISP:TRAC:Y:AUTO ON
To Next Page
Loading...
