3GPP Base Station Measurements (Option K72) R&S FSL
1300.2519.12 4.276 E-11
Select CPICH Slot
Opens an edit dialog box to enter the slot number. The chosen slot is evaluated in the Code
Domain Power Diagram and is used for slot–based evaluations in the Code Domain Result
Summary.
The slot number is defined on the basis of the CPICH (i.e. calculated in steps of 2560 chips
starting from the beginning of the frame). The desired slot of the selected channel is converted
according to its timing offset.
Example:
Slot 0 of the CPICH is set. The selected channel has a timing offset of 2816 chips, i.e. slot 0 of
the channel is delayed by 2816 chips with respect to the frame start. Slot 0 of the CPICH
therefore corresponds to slot 14 of the last frame of the channel.
Remote: CDP:SLOT 3
Code Power Abs/Rel (Code Domain Power Diagram)
Sets the scaling of the result display.
Abs
absolute power in dB
Rel power relative to the reference chosen via the Power Ref TOT/CPICH softkey in
dBm (default setting)
Remote: CALC:FEED 'XPOW:CDP'
Power Ref TOT/CPICH (Code Domain Power Diagram)
Sets the power reference for the relative power displays (see also Code Power Abs/Rel
softkey):
TOT
total power
CPICH
power of the common pilot channel (default setting)
In contrast to the variable total power, the power of the CPICH is the same
in all slots so that it can form the constant reference for the display.
Remote: CDP:PREF TOT
Scrambling Code
Opens the scrambling code menu.
To Next Page
Loading...
