R&S FSL 3GPP Base Station Measurements (Option K72)
1300.2519.12 4.275 E-11
Softkeys of the settings menu (3G FDD BTS mode)
The following table shows all softkeys available in the main menu of the 3GPP Base Station
Measurements option (MENU key). It is possible that your instrument configuration does not provide all
softkeys. If a softkey is only available with a special option, model or (measurement) mode, this
information is delivered in the corresponding softkey description.
Menu / Command Command
Select Channel
Select CPICH Slot
Code Power Abs/Rel
Power Ref TOT/CPICH
Scrambling Code Scrambling Code
Scrambling Code Autosearch
Show List
Format Hex/Dec
Adjust Ref Level
More
Invert Q On/Off
Normalize On/Off
Antenna Diversity On/Off
Antenna Number 1/2
Inactive Channel Threshold
HSDPA/HSUPA On/Off
Sync Type CPICH/SCH
Select Channel
Opens an edit dialog box to enter the channel number and spreading factor, separated by a
decimal point. The chosen channel is marked red in the Code Domain Power Diagram and this
channel is used for channel–based evaluations in the Code Domain Result Summary.
Example:
entry 5.128
Channel 5 is marked at spreading factor 128 (30 ksps), if the channel is active; otherwise code
20 at spreading factor 512 is selected.
Remote: CDP:CODE 30
To Next Page
Loading...
