3GPP Base Station Measurements (Option K72) R&S FSL
1300.2519.12 4.280 E-11
Softkeys of the amplitude menu (3G FDD BTS mode)
The following table shows all softkeys available in the amplitude menu in 3G FDD BTS mode. It is
possible that your instrument configuration does not provide all softkeys. If a softkey is only available
with a special option, model or (measurement) mode, this information is delivered in the corresponding
softkey description.
Command
Ref Level
Adjust Ref Level
Ref Level Offset
dB per Division
Reference Position
RF Atten Manual
RF Atten Auto
Ref Level
For details refer to the Ref Level softkey in the amplitude menu of the base unit.
Adjust Ref Level
For details refer to the Adjust Ref Level softkey in the settings menu.
Ref Level Offset
For details refer to the Ref Level Offset softkey in the amplitude menu of the base unit.
dB per Division
Opens an edit dialog box to set the scaling of the y–axis in dB.
Remote: DISP:TRAC:Y:PDIV +10dB
Reference Position
For details refer to the Ref Level Position softkey in the amplitude menu of the base unit.
RF Atten Manual
For details refer to the RF Atten Manual softkey in the amplitude menu of the base unit.
RF Atten Auto
For details refer to the RF Atten Auto softkey in the amplitude menu of the base unit.