CDMA2000 BTS Analyzer (Option K82) R&S FSL
1300.2519.12 4.336 E-11
Start
Opens an edit dialog box to define the start frequency. For further details refer to the Start
softkey in the frequency menu of the base unit.
Note that the softkey is unavailable for Code Domain and CCDF measurements.
Remote: FREQ:STAR 800 MHz
Stop
Opens an edit dialog box to define the stop frequency. For further details refer to the Stop
softkey in the frequency menu of the base unit.
Note that the softkey is unavailable for Code Domain and CCDF measurements.
Remote: FREQ:STOP 1.500 MHz
CF-Stepsize
For details including the submenu refer to the CF Stepsize softkey in the frequency menu of the
base unit.
Softkeys of the span menu (CDMA2000 BTS Analyzer mode)
The following table shows all softkeys available in the span menu in CDMA2000 BTS Analyzer mode.
It is possible that your instrument configuration does not provide all softkeys. If a softkey is only
available with a special option, model or measurement mode, this information is delivered in the
corresponding softkey description.
Note that the span menu is not available for code domain measurements and the signal power
measurement.
Command
Span Manual
Sweeptime Manual
Start
Stop
Full Span
Last Span
Span Manual
For details refer to the Span Manual softkey in the span menu of the base unit.
Sweeptime Manual
For details refer to the Sweeptime Manual softkey in the bandwidth menu of the base unit.
To Next Page
Loading...
