R&S FSL CDMA2000 BTS Analyzer (Option K82)
1300.2519.12 4.337 E-11
Start
For details refer to the Start softkey in the span menu of the base unit.
Stop
For details refer to the Stop softkey in the span menu of the base unit.
Full Span
For details refer to the Full Span softkey in the span menu of the base unit.
Last Span
For details refer to the Last Span softkey in the span menu of the base unit.
Softkeys of the amplitude menu (CDMA2000 BTS Analyzer mode)
The following table shows all softkeys available in the amplitude menu in CDMA2000 BTS Analyzer
mode. It is possible that your instrument configuration does not provide all softkeys. If a softkey is only
available with a special option, model or measurement mode, this information is delivered in the
corresponding softkey description.
Menu / Command Command
Ref Level
Adjust Ref Level
Ref Level Offset
Preamp On/Off
Scaling Auto Scale Once
y-Axis Maximum
y-Axis Minimum
RF Atten Manual
RF Atten Auto
Ref Level
For details refer to the Ref Level softkey in the amplitude menu of the base unit.
Adjust Ref Level
For details refer to the Adjust Ref Level softkey in the Code Domain Analyzer menu.
Ref Level Offset
For details refer to the Ref Level Offset softkey in the amplitude menu of the base unit.
To Next Page
Loading...
