Instrument Setup and Interface Configuration - SETUP Key R&S FSL
1300.2519.12 4.500 E-11
L
XI
Opens the LXI submenu containing the following softkeys:
LAN Status On/Off
Info
Password
Description
LAN Reset
LAN Status On/Off
Activates the LAN status bar that shows the current status of the LAN connection.
Depending on the status of the connection, the LXI logo in the LAN Status Indicator window
assumes the following states:
Red No connection is established
Green A connection is established
Blinking The device has not been identified
This softkey is availbale from firmware version 1.90.
Info
Shows the current parameter of LXI class C. The R&S FSL displays the current version, class
and various computer parameter like computer name or IP adress.
While active, the dialog is not updated.
This softkey is availbale from firmware version 1.90.
Remote: SYST:LXI:INF?
Password
Shows the currently set password. You can also change the current password using this softkey.
The password is needed to change settings via the web browser (e.g. IP parameter). An empty
password is not valid, i.e. you must enter a password.
By default, the password is LxiWebIfc.
This softkey is availbale from firmware version 1.90.
Remote: SYST:LXI:PASS <string>
To Next Page
Loading...
