Instrument Setup and Interface Configuration - SETUP Key R&S FSL
1300.2519.12 4.506 E-11
Display Pwr Save On/Off
Switches the power-save mode for the display on/off and opens an edit dialog box to enter the
time for the power-save function to respond. After the elapse of this time the display is
completely switched off, i.e. including backlighting. This mode is recommended when the
instrument is exclusively operated in remote control.
For details on the power-save mode for the display refer to the Quick Start Guide, chapter 2
"Preparing for Use".
This softkey is available from firmware version 1.10.
Remote: DISP:PSAV ON
Remote: DISP:PSAV:HOLD 15
Monitor Int/Ext
Switches from the internal instrument monitor to an external monitor and vice versa. The softkey
is only effective, if an external monitor is connected. For further details refer to the Quick Start
Guide, chapter 2 "Preparing for Use".
This softkey is available from firmware version 1.80.
Soft Frontpanel
Activates or deactivates the display of the instrument emulation.
deactivated Only the measurement screen is displayed. This is the setting for working at
the R&S FSL.
activated Additionally to the measurement screen, the whole front panel is displayed.
This is the setting for working at a computer with XP Remote Desktop or at
an external monitor.
Alternatively to this softkey, you can use the F6 key.
Remote: SYST:DISP:FPAN ON
Firmware Update
Opens a submenu to install firmware versions. The installation of a new firmware version can be
performed via USB or LAN interface. For details on installation refer to the Quick Start Guide,
chapter 3 "Firmware Update and Installation of Firmware Options".
Firmware Update
Opens the Firmware Update dialog box. The update path is changed by entering the new path
or via the Browse button. The installation is started via the Execute button. For details on
installation refer to the Quick Start Guide, chapter 3 "Firmware Update and Installation of
Firmware Options".
Remote: SYST:FIRM:UPD 'D:\FW_UPDATE'
To Next Page
Loading...
