EasyManua.ls Logo

Rohde & Schwarz R&S FSL3 - Page 692

Rohde & Schwarz R&S FSL3
1734 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
R&S FSL Instrument Setup and Interface Configuration - SETUP Key
1300.2519.12 4.507 E-11
Option Licenses
Opens a submenu to install options. For details on options refer to the Quick Start Guide,
chapter 3 "Firmware Update and Installation of Firmware Options".
Install Option
Opens an edit dialog box to enter the license key for the option that you want to install.
A message box open if an option is about to expire or has already expired (in which case all
functions (including remote control) are unavailable until the R&S FSL is rebooted). For more
information about the option in question refer to the System Info softkey in the setup menu.
Shutdown Off/Standby
Configures the shutdown behavior of the R&S FSL when switched off via the ON/STANDBY key
on the front panel.
Off
If activated, the R&S FSL is shutdown completely when switched off via the
ON/STANDBY key on the front panel. When switched on the next time, the
R&S FSL will completely reboot.
To prevent the instrument from overheating, the fan remains active.
Standby
If activated, the R&S FSL goes into the standby mode when switched off via the
ON/STANDBY key on the front panel. When switched on the next time, the boot
time is shorter. This is the default setting.
This softkey is available from firmware version 1.80.
System Info
Opens a submenu to display detailed information on module data, device statistics and system
messages.
Hardware Info
Opens a dialog box that displays hardware information, e.g. on the frontend and motherboard.
Every listed component is described by its serial number, order number, model information,
hardware code, and hardware revision.
Remote: DIAG:SERV:HWIN?
Versions+Options
Opens a dialog box that displays a list of hardware and firmware information, e.g. the firmware
version, the image version, BIOS version, data sheet version of the basic device, installed
options (hardware and firmware options).
For details on options refer to the Quick Start Guide, chapter 2 "Checking the Furnished Items".
Remote: *IDN?
Remote: *OPT?

Table of Contents

Related product manuals