CALCulate Subsystem R&S FSL
1300.2519.12 6.20 E-11
Characteristics
RST value: –
SCPI: device–specific
Mode
A, ADEMOD, CATV, CDMA, EVDO, SPECM, WCDMA
CALCulate<1|2>:DELTamarker<1...4>:MODE
This command switches between relative and absolute frequency input of the delta marker (or
time with span = 0).
The numeric suffixes <1|2> are irrelevant for this command.
Parameter
ABSolute | RELative
Example
CALC:DELT:MODE ABS
Switches the frequency/time indication for all delta markers to absolute values.
CALC:DELT:MODE REL
Switches the frequency/time indication for all delta markers to relative to marker 1.
Characteristics
RST value: REL
SCPI: device–specific
Mode
all
CALCulate<1|2>:DELTamarker<1...4>:TRACe
This command assigns the selected delta marker to the indicated trace. The selected trace must
be active, i.e. its state must be different from "BLANK".
The numeric suffixes <1|2> are irrelevant for this command.
Parameter
1 to 6
Example
CALC:DELT3:TRAC 2
Assigns delta marker 3 to trace 2.
Characteristics
RST value: –
SCPI: device–specific
Mode
A, ADEMOD, CATV
To Next Page
Loading...
