Rohde & Schwarz R&S FSL3 - Page 784

R&S FSL CALCulate Subsystem
1300.2519.12 6.25 E-11
C
ALCulate<1|2>:ESPectrum:PSEarch|:PEAKsearch:PSHow
This command marks all peaks with blue squares in the diagram.
T
he numeric suffixes <1|2> are not relevant.
This command is available from firmware version 1.80.
Parameter
ON | OFF
Example
CALC:ESP:PSE:PSH ON
Marks all peaks with blue squares.
Characteristics
RST value: OFF
SCPI: device–specific
Mode
A, CDMA, EVDO