R&S FSL DISPlay Subsystem
1300.2519.12 6.131 E-11
Example
DISP:SIZE LARG
Displays the measurement diagram in full screen size.
DISP:WIND2:SIZE LARG
Displays the list in full screen size.
Characteristics
*RST value: SMALl
SCPI: device–specific
Mode
A, ADEMOD
DISPlay[:WINDow<1|2>]:TEXT[:DATA]
This command defines a comment (max. 20 characters) which can be displayed on the screen.
This command is available from firmware version 1.10.
Parameter
<string>
Example
DISP:WIND:TEXT 'Noise Measurement'
Defines the screen title.
Characteristics
*RST value: "" (empty)
SCPI: conform
Mode
all
DISPlay[:WINDow<1|2>]:TEXT:STATe
This command switches on or off the display of the comment (screen title).
This command is available from firmware version 1.10.
Parameter
ON | OFF
Example
DISP:TEXT:STAT ON
Switches on the title.
Characteristics
*RST value: OFF
SCPI: conform
Mode
all
To Next Page
Loading...
