R&S FSL HCOPy Subsystem
1300.2519.12 6.143 E-11
C
haracteristics
*RST value: SYST:COMM:CLIP
SCPI: conform
M
ode
all
HCOPy:DEVice:COLor
This command selects between color and monochrome hardcopy of the screen.
This command is available from firmware version 1.10.
Parameter
ON | OFF
Example
HCOP:DEV:COL ON
Characteristics
*RST value: OFF
SCPI: conform
Mode
all
HCOPy:DEVice:LANGuage<1|2>
This command determines the data format of the printout.
Parameter
GDI Graphics Device Interface:
Default format for the output to a printer configured under Windows.
Must be selected for the output to the printer interface.
Can be used for the output to a file. The printer driver configured
under Windows is used in this case and a printer-specific file format is
thus generated.
(see also HCOPy:DESTination<1|2> command)
WMF, EWMF WINDOWS Metafile and Enhanced Metafile Format:
Data formats for output files which can be integrated in corresponding
programs for documentation purposes at a later time. WMF can only
be used for output to a file and EWMF also for the output to the
clipboard.
(see also HCOPy:DESTination<1|2> command)
BMP, JPG,
PNG
Data format for output to files only.
Example
HCOP:DEV:LANG WMF
To Next Page
Loading...
