HCOPy Subsystem R&S FSL
1300.2519.12 6.144 E-11
C
haracteristics
*RST value: -
SCPI: conform
M
ode
all
HCOPy:ITEM:ALL
This command selects the complete screen to be output.
The hardcopy output is always provided with comments, title, time and date. As an alternative to
the whole screen, e.g. only traces (HCOPy:ITEM:WINDow<1|2>:TRACe:STATe command)
can be output.
Example
HCOP:ITEM:ALL
Characteristics
*RST value: -
SCPI: conform
Mode
all
HCOPy:ITEM:WINDow<1|2>:TEXT
This command defines the comment text for the printout.
The numeric suffixes <1|2> are irrelevant for this command.
Parameter
<string> with a maximum of 100 characters; line feed by means of character @
Example
HCOP:ITEM:WIND:TEXT 'comment'
Characteristics
RST value: -
SCPI: device-specific
Mode
all
HCOPy:ITEM:WINDow<1|2>:TRACe:STATe
This command selects the output of the currently displayed trace.
The numeric suffixes <1|2> are irrelevant for this command.
Both the HCOPy:ITEM:WINDow<1|2>:TRACe:STATe command and the HCOPy:ITEM:ALL
command enable the output of the whole screen.
Parameter
ON | OFF
To Next Page
Loading...
