R&S FSL HCOPy Subsystem
1300.2519.12 6.145 E-11
Example
HCOP:ITEM:WIND:TRACe:STAT ON
Characteristics
*RST value: OFF
SCPI: device-specific
Mode
all
HCOPy:PAGE:ORIentation<1|2>
The command selects the format of the output (portrait and landscape) (hardcopy unit 1 or 2).
Note: The command is only available provided that the output device "printer"
(HCOPy:DESTination<1|2>) has been selected.
Parameter
LANDscape | PORTrait
Example
HCOP:PAGE:ORI LAND
Characteristics
*RST value: PORT
SCPI: conform
Mode
all
HCOPy:TDSTamp:STATe<1|2>
This command activates and deactivates if the time and date are on the printout.
The numeric suffixes <1|2> define the print device number.
Parameter
ON | OFF
Example
HCOP:TDST:STAT OFF
Deactivates the time and time for printouts.
HCOP:TDST:STAT?
Queries if time and date are activated or not.
Characteristics
*RST value: OFF
SCPI: device-specific
Mode
all
To Next Page
Loading...
