Rohde & Schwarz R&S FSL3 - Page 924

R&S FSL MMEMory Subsystem
1300.2519.12 6.165 E-11
Example
MMEM:SEL:HWS ON
Characteristics
*RST value: ON
SCPI: device-specific
Mode
all
MMEMory:SELect[:ITEM]:LINes:ALL
This command includes all li mit lines (activated and de-activated) in the settings file to be
stored/loaded.
This command is available from firmware version 1.10.
Parameter
ON | OFF
Example
MMEM:SEL:LIN:ALL ON
Characteristics
*RST value: ON
SCPI: device-specific
Mode
all
MMEMory:SELect[:ITEM]:NONE
This command excludes all items from the settings file to be stored/loaded.
This command is an event and therefore has no *RST value.
Example
MMEM:SEL:NONE
Characteristics
*RST value: -
SCPI: device-specific
Mode
all
MMEMory:SELect[:ITEM]:SCData (models with tracking generator)
This command includes the tracking generator calibration data in the settings file to be
stored/loaded.
This command is only available in conjunction with the tracking generator.Parameter
ON | OFF
Example
MMEM:SEL:SCD ON
Adds the tracking generator correction data to the items list.