Rohde & Schwarz R&S FSL3 - Page 926

R&S FSL MMEMory Subsystem
1300.2519.12 6.167 E-11
Characteristics
RST value: -
SCPI: device-specific
Mode
A
MMEMory:STORe<1|2>:PEAK
This command stores the current marker peak list in a *.dat file. The file consists of a data
section containing the peak list.
The numeric suffixes <1|2> are irrelevant for this command.
This command is an event and therefore has no *RST value and no query.
This command is available from firmware version 1.80.
Parameter
<file_name> = DOS file name without extension
The file name includes the indication of the path and may also include the drive name. The path
name complies with DOS conventions.
Example
MMEM:STOR:PEAK 'test'
Saves the current marker peak list in the file test.dat.
Characteristics
RST value: -
SCPI: device-specific
Mode
all
MMEMory:STORe<1|2>:STATe
This command stores the current device settings in a *.FSL.dfl file.
The numeric suffixes <1|2> are irrelevant for this command.
This command is an event and therefore has no *RST value and no query.
Parameter
1,<file_name>
with <file_name> = DOS file name without extension
The file name includes the indication of the path and may also include the drive name. The path
name complies with DOS conventions.
Example
MMEM:STOR:STAT 1,'Save'
Saves the current device settings in the file Save.FSL.dfl.
Characteristics
*RST value: -
SCPI: conform
Mode
all