Rohde & Schwarz R&S FSL3 - Page 950

R&S FSL SENSe Subsystem
1300.2519.12 6.191 E-11
C
haracteristics
RST value: 30.0 kHz
SCPI: device–specific
M
ode
A, CDMA, EVDO
[SENSe<1|2>:]ESPectrum:RANGe<1...20>:BANDwidth:VIDeo
This command sets the VBW value for the specified range.
The numeric suffixes <1...20> specify the range. The numeric suffixes <1|2> are not relevant.
This command is available from firmware version 1.80.
Parameter
Refer to the data sheet.
Example
ESP:RANG1:BAND:VID 5000000
Sets the VBW for range 1 to 5 MHz.
Characteristics
RST value: 10.0 MHz
SCPI: device–specific
Mode
A, CDMA, EVDO
[SENSe<1|2>:]ESPectrum:RANGe<1...20>:COUNt?
This command returns the number of defined ranges.
The numeric suffixes are not relevant.
This command is only a query and therefore has no *RST value.
This command is available from firmware version 1.80.
Example
ESP:RANG:COUNt?
Returns the number of defined ranges.
Characteristics
RST value: –
SCPI: device–specific
Mode
A, CDMA, EVDO