SENSe Subsystem R&S FSL
1300.2519.12 6.228 E-11
SENSe:ROSCillator Subsystem
This subsystem controls the reference oscillator. The numeric suffix in SENSe is irrelevant for the
commands of this subsystem.
Commands of the SENSe:ROSCillator Subsystem
– [SENSe<1|2>:]ROSCillator:SOURce
[SENSe<1|2>:]ROSCillator:SOURce
This command controls selection of the reference oscillator.
If the external reference oscillator is selected, the reference signal must be connected to the
rear panel of the instrument.
Parameter
INTernal | EXTernal
Example
ROSC:SOUR EXT
Characteristics
*RST value: -
SCPI: conform
Mode
all
To Next Page
Loading...
