Safran SecureSync 2400 - Page 132

The graphs maybe saved and downloaded (> ARROWicon), or deleted (>
TRASHCAN icon).
The Actions panel
… is in the top left-hand corner of the NTP screen comprises the following but-
tons:
Symmetric Keys: Click here to set up your symmetric keys for MD5 authen-
tication. For more information on Symmetric Keys, see "Configuring NTP
Symmetric Keys" on page130.
Access Restrictions: Click here to view, change or delete access restric-
tions to the NTP network. (See also "NTP Access Restrictions" on page133.)
Fields in the NTP Access Restrictions table include:
Type
IP Version
IP
IP Mask
Auth only
Enable Query
View NTP Clients: Click here to reveal a table of all the clients your
SecureSync is servicing. (See also "Viewing NTP Clients" on page118.)
Information for each client includes:
Client IP
Received Packets
Mode
Version
Restriction Flags
Avg Interval
Last Interval
Restore Default NTP Configuration: Click here to restore SecureSync’s
NTP settings to the factory default. Any settings you have created pre-
viously will be lost. See "Restoring the Default NTP Configuration" on
page118.
The NTP Services panel
… is the second panel on the left-hand side of the NTP screen. It has two switches:
116
CHAPTER 2 • SecureSync 2400 User Manual Rev. 5.2
2.15 Configure NTP