Safran SecureSync 2400 - Network Interface Option Cards; NTP and Networking [4 A, 49]

Format: Indicates the configured format of the ASCII time code input data
stream.
5.2.6 Network Interface Option Cards
This section contains technical information and SecureSync Web UI procedures
pertaining to option cards designed as Ethernet network interfaces using, e.g. the
PTP format.
5.2.6.1 NTP and Networking [4A, 49]
The NTP and Networking cards have interfaces that allow the user to com-
municate outside of the normal channels that the SecureSync provides.
The 4A card, for instance, provides (4) 1 Gb NTP Server Outputs that can operate
independently of the unit network.
The Ethernet ports provided on the NTPand Networking cards are designed for
machine-to-machine network communication providing NTPfunctions. There is
no management interface access through these cards. Settings are available for
these Ethernet ports through the WebUI (login is available through the usual
means).
Quad 1 Gb NTP Server [-4A]: Specifications
Inputs/Outputs: (4) Gigabit Ethernet
Connectors: SFP Ports (4x)
Management: Enabled or Disabled (NTP server only)
Maximum Number of Cards: 2
Ordering Information: 1204-4A: Quad Gigabit Ethernet
Figure 5-54: 1204-4A option card rear plate
SecureSync 2400 User Manual 495
APPENDIX