3.
Click Choose File in the window that displays, and navigate to the dir-
ectory on your PC where the bundled file is stored.
4.
Click the Upload button. SecureSync saves the uploaded bundled file in the
/home/spectracom/xfer/config/directory.
Note: When uploading files remotely via long distances, or
when uploading multiple files via several browser windows sim-
ultaneously, the upload process may fail to complete. In this
case, cancel the upload by clicking X, and go back to Step2.
5.
To use the new configuration file for this SecureSync, click the Restore Con-
figuration button, and follow the procedure described under "Restoring
the System Configuration" below.
4.7.4 Restoring the System Configuration
To restore the System Configuration:
1.
Navigate to TOOLS > SYSTEM: Upgrade/Backup.
2.
In the Actions panel, click Restore Configuration.
3.
Click OK in the grey confirmation window. The system will restore the con-
figuration using the bundled file stored at /home/spec-
tracom/xfer/config/SecureSync.conf, then reboot in order to read the
344
CHAPTER 4 • SecureSync 2400 User Manual Rev. 5.2
4.7 Backing-up and Restoring Configuration Files
To Next Page
Loading...
