Safran SecureSync 2400 - Adding;Removing a TACACS+ Server

1.
In the Web UI, navigate to MANAGEMENT > OTHER: Authentication.
2.
In the Actions panel on the left, click TACACS+. The TACACS+ Setup win-
dow will be displayed.
3.
Configure the Default User Group to select your preferred default user per-
missions level (Admin or User)
4.
Under Enable TACACS+, click the toggle to ON to enable TACACS+, and
click the toggle to OFF to disable this feature.
5. Click Submit.
4.3.6.2 Adding/Removing a TACACS+ Server
To add a TACACS+ authentication server, or remove a server from the list:
1.
Navigate to MANAGEMENT > OTHER: Authentication.
2.
In the Actions panel on the left, click TACACS+ Setup. The TACACS+
Setup window will be displayed:
3. Fill out the fields:
Host: The hostname or IP address of the TACACS+ server
Port: Defines the TACACS+ Port to use.
4.3 Managing Users and Security
CHAPTER 4 • SecureSync 2400 User Manual Rev. 5.2
295