2.4 SAFETY
Safety: Symbols Used
Table 2-1: Safety symbols used in this document, or on the product
Symbol Signal word Definition
DANGER!
Potentially dangerous situation which may lead to
personal injury or death! Follow the instructions
closely.
CAUTION!
Caution, risk of electric shock.
CAUTION!
Potential equipment damage or destruction!
Follow the instructions closely.
NOTE
Tips and other useful or important information.
ESD
Risk of Electrostatic Discharge! Avoid potential
equipment damage by following ESD Best
Practices.
Analog Ground
Shows where the protective ground terminal is con-
nected inside the instrument. Never remove or
loosen this screw!
Recycle
Recycle the mentioned components at their end of
life. Follow local laws.
SAFETY: Before You Begin Installation
This product has been designed and built in accordance with state-of-the-art
standards and the recognized safety rules. Nevertheless, its use may constitute a
risk to the operator or installation/maintenance personnel, if the product is used
under conditions that must be deemed unsafe, or for purposes other than the
product's designated use, which is described in the introductory technical
chapters of this guide.
2.4 SAFETY
CHAPTER 2 • SecureSync 2400 User Manual Rev. 5.2
45
To Next Page
Loading...
