Safran SecureSync 2400 - Programmable Frequency out [1204-13, -2 F, -30]

The Status window displays the following settings:
Signature Control: Controls when the output will be present. See also: "Sig-
nature Control" on page183.
Frequency: The frequency of the output: 1MHz, 5MHz or 10MHz, depending
on the card model.
For more information on monitoring installed option cards, see: "Monitoring the
Status of Option Cards" on page315.
5.2.3.5 Programmable Frequency Out [1204-13, -2F, -30]
Programmable Frequency Output option modules provide output square waves
at programmable pulse rates, or sine waves at programmable frequencies. The
output frequency, which is adjustable via the SecureSync Web UI, is locked to the
SecureSync system-disciplined oscillator.
These option cards can be used for a variety of applications requiring pro-
grammable frequency outputs. The RS-485 model of this card can be operated
as an N.8 frequency synthesizer.
Depending on your card model number, the outputs are available in different
formats:
RS-485 on a pluggable terminal block
TTL square wave on BNC, or
Sine wave on BNC
Each output can be phase-offset between 0-360° in 0.1°-increments.
Programmable Frequency Card 1204-13 (Sine Wave, BNC): Spe-
cifications
Outputs: (4) independently programmable sine wave outputs
Signal Type: +13dBm
Wave Form: sine
406 SecureSync 2400 User Manual
APPENDIX