Safran SecureSync 2400 - 2.15.12.6 Testing NTP over Anycast; NTP Orphan Mode

Example ospf6d.conf file:
*****************************************************
!
interface eth0
!
router ospf6
router-id 10.2.100.157
interface eth0 area 0.0.0.0
redistribute connected
!
*****************************************************
Example bgpd.conf file:
*****************************************************!
router bgp 12
bgp router-id 172.17.1.12
network 172.17.0.0/16
neighbor 172.17.1.1 remote-as 3
!
redistribute connected
*****************************************************
2.15.12.6 Testing NTP over Anycast
Note: A detailed Anycast test procedure is available from Safran
upon request. Please contact TimingSupport@nav-
timing.safrangroup.com.
2.15.13 NTP Orphan Mode
The NTP Orphan Mode allows SecureSync to remain a valid time server to its NTP
clients even if all its input references have become invalid and the Holdover
period has expired.
144
CHAPTER 2 • SecureSync 2400 User Manual Rev. 5.2
2.15 Configure NTP