Safran SecureSync 2400 - 2.20.4 Configure an ASCII Output

4. Click Submit.
2.20.4 Configure an ASCII Output
An ASCII Output is available by default and configuration through the Multi-I/O
connector (see "Configurable Connectors" on page157).
To configure the ASCII Output, go to its Edit window.
The Output Edit window allows the configuration of the following settings:
Format Group – configures the message format type. Choices are:
None (no message will be output)
Spectracom
NMEA
BBC
ICD-153
EndRun
172
CHAPTER 2 • SecureSync 2400 User Manual Rev. 5.2
2.20 Configuring Outputs