* When the receiver time is derived from the battery backed clock or set manually through
the Setup Port Interface.
E x a m p l e :
FRI 20APR01 12:45:36
The example data stream provides the following information:
Sync
Status
The clock is not time synchronized to GNSS. Time is derived from the battery
backed clock or set manually
Date Friday, April 23, 2015
Time 12:45:36
5.4.6 Spectracom Format 1S
Format 1S (Space) is very similar to Format 1, with the exception of a space being
the first character of Days 1 through 9 of each month (instead of the leading “0”
which is present in Format 1).
Most external systems utilizing Data Format 1 will look for a single digit day of the
month for day 1 through day 9, with a space in front of each digit (^1, ^2, ^3 … 10,
11…) whereas other systems need to see a two digit day of the month for all days 1
through 9 with a leading 0 instead of a space (01, 02, 03… 10, 11…).
If your device requires the single digit day of the month for days 1 through 9
(i.e. 1, 2, etc.), select Format 1S.
If your device requires the two digit day of the month for days 1 through 9
(i.e. 01, 02, etc.), select Format 1 instead. Refer to "Spectracom Format 1" on
page564 for information on Format 1.
E x a m p l e m e s s a g e :
CR LF I ^ WWW ^ DDMMMYY ^ HH:MM:SS CR LF
Where:
CR Carriage Return
LF Line Feed
566 SecureSync 2400 User Manual
APPENDIX
To Next Page
Loading...
