Safran SecureSync 2400 - The Securesync Web UI; The Web UI HOME Screen

MIL-STD-810G: 500.6, 501.6, 502.6, 503.6, 507.6
MIL-STD-810H: 514.8, 516.8
1.7 The SecureSync Web UI
SecureSync has an integrated web user interface (referred to as "WebUI"
throughout this documentation) that can be accessed from a computer over a
network connection, using a standard web browser. The WebUI is the most com-
plete way to configure the unit, and for status monitoring during everyday oper-
ation.
Note: If you prefer, an integrated Command-Line Interpreter inter-
face (CLI) allows the use of a subset of commands. See "Command-
Line Interface" on page554.
Note: Should it ever be necessary, you can restore SecureSync's con-
figuration to the factory settings at any time. See "Resetting the Unit
to Factory Configuration" on page345.
1.7.1 The Web UI HOME Screen
Note: Screens displayed in this manual are for illustrative purposes.
Actual screens may vary depending upon the configuration of your
product.
The HOME screen of the SecureSync web user interface ("Web UI") provides
comprehensive status information at a glance, including:
vital system information
current status of the references
key performance/accuracy data
major log events.
The HOMEscreen can be accessed from anywhere in the Web UI, using the
HOMEbutton in the Primary Navigation Bar:
The Primary Navigation Bar provides access to all menus:
34
CHAPTER 1 • SecureSync 2400 User Manual Rev. 5.2
1.7 The SecureSync Web UI