Command Description
slaacget Displays whether SLAAC is enabled
slaacset Used to enable or disable SLAAC
stateset Enable or disable an entry in the reference priority table. index = 0...15.
state = 0 (disable), 1 (enable)
status Displays information about the oscillator disciplining
stlgetinfo Provides STL data
swupgrade Performs system upgrade using the update bundle provided
syncstate Display timing system synchronization state
testevent Generates SNMP events in the enterprise MIB
tfomget Displays current estimated system time error (TFOM – Time Figure of
Merit)
timeget Displays current system time (time is displayed in the configured
timescale – See
scaleget
command to retrieve the configured
timescale)
timeset Used to manually set the current time (hours, minutes in seconds);
time is entered based on the configured timescale – See
scaleget
command to retrieve the configured timescale
unrestrict Used for clearing access control restrictions to SecureSync
version Displays the installed main SecureSync and timing system software
versions
vlanadd Add a VLAN connection
vlandel Delete a VLAN connection
yearget Displays the current year
yearset Used to set the current year
zeroize Applicable to SAASM-equipped SecureSync units only
5.4 Time Code Data Formats
To Next Page
Loading...
