The unit will display the status of the change.
E x a m p l e 2 :
To create a Local Clock for a SecureSync installed in the Eastern Time Zone of the US,
and desiring the Local Clock to automatically adjust for DST (using the post 2006 DST
rules for the US).
1. In the MANAGEMENT > Time Management: Local Clocks > (+): Local
Clock window:
2. Navigate to MANAGEMENT > Time Management: Local Clocks > (+):
Local Clock.
3. From the UTC Offset pull-down menu, select “UTC -05:00”.
4. Select the Use DST Rules checkbox.
5. Select the Set DST Rules by Region checkbox.
6. From the DST Region drop-down list, select “US-Canada.”
7. Review the changes made and click the Submit button.
The unit will display the status of the change.
3.2.4.3 DST and UTC, GMT
Neither UTC, nor GMT ever change to Daylight Savings Time (DST). However,
some of the countries that use GMT switch to a different time zone offset during
their DST period. The United Kingdom is not on GMT all year, but uses British
Summer Time (BST), which is one hour ahead of GMT, during the summer
months.
Additional information about regional time zones and DST can be found on the
following web sites: http://www.worldtimeserver.com/,
http://webexhibits.org/daylightsaving/b.html.
3.2 System Time
CHAPTER 3 • SecureSync 2400 User Manual Rev. 5.2
203
To Next Page
Loading...
