Safran SecureSync 2400 - Backing-Up and Restoring Configuration Files

1.
Save the license file license.tar.gz to a location on your PC (which
needs to be connected to the same network SecureSync is.)
2.
Open the SecureSync WebUI, and navigate to Tools > Upgrade/Backup:
3.
In the Actions panel, click Apply License File.
4.
In the Apply License File window, click Upload New File.
5.
In the Upload File window, click Choose File. Using the Explorer window,
navigate to the location mentioned under the first step, select the license
file, and monitor the installation progress in the Status Upgrade window
until the application has rebooted.
6. Refresh the browser window, and login to the Web UIagain. Re-navigate to
Tools > Upgrade/Backup, and confirm that the newly installed Option is lis-
ted in the System Configuration panel.
4.7 Backing-up and Restoring Configuration Files
Once SecureSync has been configured, it may be desired to back up the con-
figuration files to a PC for off-unit storage. If necessary in the future, the original
configuration of the SecureSync can then be restored into the same unit.
The capability to backup and restore configurations also adds the ability to
“clone” multiple SecureSync units with similar settings. Once one SecureSync unit
has been configured as desired, configurations that are not specific to each unit
(such as NTP settings, log configs, etc.) can be backed up and loaded onto
another SecureSync unit for duplicate configurations.
340
CHAPTER 4 • SecureSync 2400 User Manual Rev. 5.2
4.7 Backing-up and Restoring Configuration Files